News

  • How to quickly identify the clay crucible drawing fiberglass production line

    How to quickly identify the clay crucible drawing fiberglass production line

    Earthenware glass fiber production line uses earthenware crucible as drawing plate, which is essentially different from platinum crucible drawing line and pool kiln drawing line. But for ordinary people who are not very familiar with the glass fiber industry, the ceramic crucible wire drawing pro...
    Read more
  • How much do you know about the various molding processes of composite materials?

    How much do you know about the various molding processes of composite materials?

    All kinds of molding process comparison   Hand paste molding and jet molding allow for rapid product development cycles because the tool manufacturing process is simple and relatively inexpensive. Hand lay-up molding   Although the operation of hand paste forming is simple, it requires higher o...
    Read more
  • Precautions for gelcoat operation

    Precautions for gelcoat operation

    If you want to reduce the problem of gelcoat, it is very valuable to take a close look at the experience of some people who have been there, and summarize the do’s and don ‘ts.   Want to do Establish the correct gelcoat type before starting work, ensure complete and thorough molds are...
    Read more
  • New fiberglass tiles for self-built houses or villas Can replace cement tile and ceramic tile

    New fiberglass tiles for self-built houses or villas Can replace cement tile and ceramic tile

    Since building a house or villa, want to use exterior wall brick and tile commonly, before everybody perhaps did not pursue appearance so, use cement tile, ceramic tile so. However, the quality of cement tiles we all know, a fall will be broken, and the outer wall tiles, and easy to empty drum o...
    Read more
  • The importance of resin selection

    The importance of resin selection

    The main components of composite materials are fiber and resin.The fiber is usually glass or carbon fiber, both of which enhance the strength and stiffness required by the product.However, if used alone, it still cannot meet the final performance of the product.Impregnated with resins and then c...
    Read more
  • Glass fiber reinforced plastic (FRP) board process and practical tip

    Glass fiber reinforced plastic (FRP) board process and practical tip

    Introduction to machine board Plate forming initially for hand paste molding. Poor operating environment, low production efficiency, unstable quality, single variety, can not meet the needs of many. And now, the use of mechanism technology, continuous molding, the use of automatic equipment, fee...
    Read more
  • Analysis and application of FRP winding process

    Analysis and application of FRP winding process

    Fiber winding is one of the manufacturing processes of resin matrix composites. There are three main forms of winding: toroidal winding, plane winding and spiral winding. The three methods have their own characteristics, and the wet winding method is the most widely used because of its relativel...
    Read more
  • How to store and use unsaturated polyester resin correctly?

    How to store and use unsaturated polyester resin correctly?

    Temperature and sunlight affect the storage time of unsaturated polyester resin. In fact, whether unsaturated polyester resin or other resins, the storage temperature is best at the current regional temperature of 25 degrees Celsius. On this basis, the lower the temperature, the longer the valid...
    Read more
  • By glass fiber, carbon fiber and other materials to create an electric luxury bus

    By glass fiber, carbon fiber and other materials to create an electric luxury bus

    As is known to all, Dubai has huge reserves of oil resources, which greatly drives the local economy and makes Dubai a world-famous bustling city. In this unique personality and high-profile city, high-grade custom sports cars are very much, but this unique shape of the “super bus” i...
    Read more
  • Fiberglass reinforced plastic resin vacuum import technology analysis of the ship

    Fiberglass reinforced plastic resin vacuum import technology analysis of the ship

    Fiberglass Reinforced Plastics (FRP) is a new type of composite material manufactured by ships in the late 1960s,with light mass,high strength,corrosion resistance,the characteristics of the plasticity.After decades of development,FRP materials have been widely used in the construction of small ...
    Read more
  • The carbon-fiber composite torch for the Beijing Winter Olympics is unveiled

    The carbon-fiber composite torch for the Beijing Winter Olympics is unveiled

      The flame of the Beijing Winter Olympic Games was displayed in Beijing on Dec. 7. The “flying” shell of the Beijing Winter Olympics torch is made of carbon fiber composite material. The technical highlights of “Flying” are the light weight carbon fiber shell and t...
    Read more
  • Italian company develops new APPLICATIONS of FRP dentistry

    Italian company develops new APPLICATIONS of FRP dentistry

    Recently,Moi Dental, a subsidiary of Italian company Moi Composites, has achieved a new milestone in the application of continuous fiber 3D printing technology in dentistry. Hi-fiber‘s reinforcement design is realized by high-precision continuous Fiber reinforced composite 3D printing tec...
    Read more